Hi everyone! We're hard at work trying to keep our community clean, so if you see any spam, please report it here and we'll review ASAP!  Thanks a million!
8,819 Users Online
  • 640,129,772 Downloads
  • 1,696,349 Wallpapers
  • 1,565,068 Members
  • 12,971,712 Votes
  • 5,965,287 Favorites
Home Groups Popular
Sign-Up For Free! Or login to your account »

dave112
Login to Become a Fan
 
ProfileWallpapers (1)Favorites (0)Journal (25)DiscussionContact Member
Journal for dave112Journal for dave112
Mar
1
Happy
Volvo Penta D1 D2 Series Engine Cylinder Head Installation Guide
This instruction show you guide on how to install cylinder head for Volvo Penta D1 D2 series engine.

Volvo Vocom 88890300
Volvo TechTool 2.8.231


Steps:
1 Check the piston height with tools 9989876 and 9995192. Select a new cylinder head gasket, please refer to “Technical data".
Check that the valve lifters are in place.


2 Check that the engine block guide pins for the cylinder head are in place. Install a new cylinder head gasket with the marking upwards.



Put the cylinder head in place. Insert the screws (1) and torque them as in the tightening schedule, to the torque specified in “Technical Data”.

3 Install the push rods (1) and valve caps (2)

4 Install a new seal on the rocker arm bridge (1). Install a new rocker arm bridge. Make sure that the push rods and rocker arms (2) are correctly aligned.
Tighten the nuts (3) evenly to the specified torque, please refer to the “Technical Data” chapter.


5 Install the oil supply pipe (1) on the cylinder head with new seals.


6 Installing the injectors:
Apply sealant part. no. 840879 to the threads of the two lowest screws (1).
Put new copper seals on the bottom of the cylinder head.
Install the injectors and tighten them evenly to the specified torque, please refer to the “Technical Data” chapter.

https://www.car-auto-repair.com
Times Viewed: 8Bookmark and Share
0 responses have been posted to this journal entry. Post Your Response!
Advertisement
Previous Journal Entry
ISUZU 4JJ1 Engine Exhaust Pipe Remove and Installation GuideHere is the instruction on how to remove and install exhaust pipe for ISUZU 4JJ1 enigne Euro 4 N series. Related Contents:2023 ISUZU E-IDSS Diagnostics for Heavy Duty Machine 2023 2019 Isuzu G-IDSS Export Diagnostic Software Free DownloadISUZU IDSS MX2-T...Read Previous Journal Entry >>Read Previous Journal Entry >>
Next Journal Entry
ClAAS Lexion 480 Checking / Topping up the Refrigerant Oil LevelClAAS Lexion 480 Checking / topping up the refrigerant oil level at the air conditioner compressor.Related Contents:CLAAS Diagnostic Kit USB Interface[05.2021] CLAAS CDS 7.5 Diagnostic System Development LevelNOTE: The oil level at the compressor must be ...Read Next Journal Entry >>Read Next Journal Entry >>

Recently Spotted Members


No members found. Be the first.