Hi everyone! We're hard at work trying to keep our community clean, so if you see any spam, please report it here and we'll review ASAP!  Thanks a million!
8,819 Users Online
  • 640,129,772 Downloads
  • 1,696,349 Wallpapers
  • 1,565,068 Members
  • 12,971,712 Votes
  • 5,965,287 Favorites
Home Groups Popular
Sign-Up For Free! Or login to your account »

dave112
Login to Become a Fan
 
ProfileWallpapers (1)Favorites (0)Journal (25)DiscussionContact Member
Journal for dave112Journal for dave112
Aug
14
Wink
Volvo EC18 Electric Hydraulic Oil Return Filter Replacement Guide
This instruction show you guide on how to replace hydraulic oil return filter for Volvo EC18 Electric machine.


Related Contents:
Volvo PROSIS 2023
Volvo Vocom 88890300
Volvo Techtool 2023


Procedures:
NOTE!
Change the hydraulic oil filter after the first 50 operating hours, thereafter every 500 operating hours.

1.Carefully clean the hydraulic oil tank cap (1) and the area around it.
2.Loosen and screw out the oil tank cap (1) with a suitable tool.
Notice:
Take care of filters, oils and liquids in an environmentally safe way.
Figure 1
Hydraulic oil tank with integrated oil filtercap
3.Remove the oil filter (1).



Figure 2
Hydraulic oil return filter, replacing oil filter element

4.Insert a new filter element.
NOTE!
Make sure that the filter element is fitted correctly in it�s seat.

Figure 3
Hydraulic oil return filter, replacing
5.Assemble and tighten the oil tank cap.

Volvo PROSIS 2023 2022 2018 Free Download
Times Viewed: 34Bookmark and Share
0 responses have been posted to this journal entry. Post Your Response!
Advertisement
Previous Journal Entry
How to Perform Hydraulic System Pressure Release for Kubota U48-4This instruction show you guide on how to release hydraulic system pressure for Kubota U48-4 excavator.Kubota Diagmaster 22.08.01Kubota DST-i Diagnostic AdapterSteps:1. Place the machine on firm, level ground, lower the bucket and blade to ground level, a...Read Previous Journal Entry >>Read Previous Journal Entry >>
Next Journal Entry
How to Configure CAT ET Software to work with CAT Adapter 2In order for Caterpillar Electronic Technician to work with the Communication Adapter II, the settings must be changed to select the Communication Adapter II as the Communication Interface Device:Preparations:CAT ET 2023ACAT Adapter 3Steps:Step 1 Start Ca...Read Next Journal Entry >>Read Next Journal Entry >>

Recently Spotted Members


No members found. Be the first.