Hi everyone! We're hard at work trying to keep our community clean, so if you see any spam, please report it here and we'll review ASAP!  Thanks a million!
12,270 Users Online
  • 640,129,772 Downloads
  • 1,696,349 Wallpapers
  • 1,565,068 Members
  • 12,971,712 Votes
  • 5,965,287 Favorites
Home Groups Popular
Sign-Up For Free! Or login to your account »

dave112
Online Now
Login to Become a Fan
 
ProfileWallpapers (1)Favorites (0)Journal (40)DiscussionContact Member
Journal for dave112Journal for dave112
Oct
24
Happy
MTU 12 V4000 Engine Injector Removal Guide
Here is the instruction show you guide on how to remove MTU 12V4000 engine injector.

1. Shut off fuel supply to engine.
2. Remove cylinder head cover

MTU DiaSys 2.74 2.72 Engine Diagnostic Software Free Download
MTU Diagnostic Tool USB-to-CAN


Removing injector
1. Disconnect cable connector on injector.
2. Remove HP fuel line (4).
3. Remove return line (5).


Note: The injector accumulator will be emptied when removing the adapter.
4. Remove adapter (3).
5. Remove screw (2) and take off hold-down clamp (1).
6. Install installation/removal tool on cylinder head.
7. Remove injector with installation/removal tool.MTU DiaSys 2.74
8. Remove installation/removal tool.
9. Remove sealing ring (4) from injector or use a self-made hook to take it out of the cylinder head.
10. Remove O-rings (3), O-ring (2) and damper ring (1) from injector.
11. Clean all mating and sealing surfaces.
12. Cover all connections and bores, or seal with suitable plugs.
Times Viewed: 2Bookmark and Share
0 responses have been posted to this journal entry. Post Your Response!
Advertisement
Previous Journal Entry
How to Change Constant Speed for Deutz EMR3?Here is the instruction show you guide on how to use Deutz SerDia2010 to change constant speed for Deutz EMR3 control unit.To use this function, the engine has to be in fixspeed mode or the setting allows to activate the fixspeed mode. Preparations:Deutz ...Read Previous Journal Entry >>Read Previous Journal Entry >>
Next Journal Entry
FENDT 900 Vario-COM III Calibration of the EPC rearHere is the instruction show you guide on how to perform calibration of the EPC rear for FENDT 900 Vario COM III.FENDT Fendias 2024 Diagnostic softwareAGCO 2x4 CANUSB Calibration of depth control (8001)Important: The following preparatory steps must be ca...Read Next Journal Entry >>Read Next Journal Entry >>

Recently Spotted Members


No members found. Be the first.